Metz Axio pro Operating Instructions Manual page 9

3. The Remote Control
The remote control sends commands to the TV set
by means of an infrared signal. You must point it
towards the TV set when using it. Note that the
remote control may interfere with the operation of
other devices which use infrared signals (such as
infrared headphones).
Sunlight falling directly on the TV set may interfere
with the operation of the remote control, since the TV
set cannot detect the infrared signals from the remote
i
control under these conditions. The TV set must be
switched on with the main power switch before it can
be controlled with the remote control.
Do not insert rechargeable batteries in
the battery compartment of the remote
control.
Use only two dry batteries of the type
LR03/ AM4/AAA 1.5V.
The batteries that are used must not be
exposed to excessive heat such as
sunshine, fire or the like.
9