Unicable - Metz Axio pro Operating Instructions Manual

20.4 Set-up of satellite system

Unicable

Each DVB-S receiver must be assigned a sub-
scriber number (SCR no.) and the associated sub-
scriber frequency (SCR freq.) from the frequency
bank (see channel router or its user's guide)
☞
Each subscriber number and subscriber fre-
quency may only be assigned once.
The DVB-S receiver in the TV set requests the data
for the desired program from the channel router.
Setting the SCR no. and SCR freq.
• Call up the TV menu with
the button
• Use the red button
open the "Configuration"
menu.
• Select the menu option
"DVB-S" with the assigned
numeric buttons. In the
example it is ´ .
• Press the button and
the "Arial facility" setup
window opens.
• Use the cursor control but-
tons to select
"Antenna" and then the V-/V+ button to select
"Unicable".
• Use the cursor control buttons to select the SCR
data for each receiver.
• Enter the required data with the
numeric buttons.
• Confirm the setting by pressing the
• Clear the "TV menu" with the
2)
to
Configuration
button.
Opening the menu
F1
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Antenna Unicable Power compensation off
SCR1 no.
SCR1 freq. 1284 MHz
button.
2) Possible only on sets equipped with this
function.
MENU
General settings
Manual search
Automatic search
Hot Bird 13°
Astra 19,2°
Arial facility
1
EXIT
95