Initial Program Position - Metz Axio pro Operating Instructions Manual

Opening the menu
MENU
Configuration
Mode of operation
Program
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
108

23. Initial Program Position

You can define an initial program position for this
TV set. The preferred use for the initial program
position is to switch to the AV program position
when using an external receiver or to set a favou-
rite channel as the start-up station when the set is
switched on
Initial program position settings
☞
F1
Function for F2
Function for F1
Data Logic adjustm.
EURO sockets
DVB-C
2)
DVB-T
2)
Display configuration
DVB-S
2)
Analog-TV
2)
Country
Language
Operating
Init. prog.position
AV
• Then select "Program". If you have selected TV
as the mode of operation, you can now set the
desired program (e.g. 004 for "RTL"). With the
AV mode of operation, you can select an exter-
nal AV connection like EURO 1, EURO 2
HDMI, etc. as an external AV connection.
• Press the
• Clear the "TV menu" with the
☞
This menu option cannot be set in a 2**
menu
• Press the
the TV menu.
Subtitle
• Use the red button
open the "Configuration"
CI dialogue via
EPG settings
menu.
2)
• Use the cursor control key to
Operating
select "Operating" and "Init.
Sound settings
prog. position" and press
HiFi output 2)
Time shift
2)
• The cursor is on the "Mode
of operation" menu option.
You can use the V-/V+ key
Satellite/set top
to set the desired mode of
operation (TV, Radio or AV).
button to save the new settings.
If the TV set is now switched on with the
power button
on the remote control, the preset initial pro-
gram position appears.
key to open
.
,
2)
button.
on the set or the button
to