Overview - Metz Axio pro Operating Instructions Manual

Configuration
"HiFi output" "Sound settings"
HiFi output Speakers
"constant" "On"
Speakers
"Off"
Speakers
"Center"
48
12.6 Sound Settings, Overview
F1
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
Country
Language
Operating
Change with
– +
HiFi output constant
Accept value with .
Output level
The volume on the "AUDIO OUT sockets" on the
back of the TV set remains "constant" at the % value
set in the menu.
The sound is also output via the speakers of the TV
set.
The volume of the TV set speaker can be changed
with the V-/V+ button of the remote control.
The volume on the "AUDIO OUT sockets" on the
back of the TV set remains "constant" at the % value
set in the menu.
The sound is not output via the speakers of the TV
set. The symbol for the mute setting appears on the
screen.
The volume cannot be changed with the V-/V+ but-
ton of the remote control.
The sound of an AV device connected to the
"CENTRE IN socket" (e.g. Surround decoder) is
output through the speaker of the TV set.
The speakers of the TV set are thus used as "centre
speakers"
Subtitle
Data Logic adjustment
CI dialogue via
EPG settings
Display configuration
Operating
Sound settings
HiFi output
Time shift
Init. prog.position
OK Mute (two-stage)
50%
Preselection of Sound 1
Subtitle
Data Logic adjustment
CI dialogue via
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Time shift
2)
Init. prog.position
on Speakers
2)
2)
2)
on