Metz Axio pro Operating Instructions Manual page 111

26. Operation without the Remote Control
Local controls for Primus
Local controls for Caleo
Switching on
Press the main power switch on the TV
set. After about 30 seconds, the TV set is
switched on with program position 1 or
the programd initial program position
selected.
You can also use the following functions
directly on the TV set, without a remote
control.
Volume
Press and hold the preselection key F until
the bar display for the volume appears
on the screen. Then press the "–" or "+"
button to adjust the volume.
Program selection
Press the – + buttons.
Program selection via program table:
Press preselection key F often enough
until the program table appears on the
screen. Select the program desired with
the "-" or "+" key. Press preselection key
F and make the selection.
Switching from TV to AV program
Press F key often enough until the selec-
tion table for the AV devices appears.
Select the AV device desired with the "–"
or "+" key. Press preselection key F and
adopt the selection.
Switching from AV to TV program
Press preselection key F often enough
until the selection list for the program
table appears. Select the program des-
ired with the "–" or "+" key. Press prese-
lection key F and adopt the selection.
111