Metz Axio pro Operating Instructions Manual page 137

35. Problem, Possible cause, Remedy
Problem
Direct recording of an
analogue terrestrial
station (received via
roof antenna or
cable) with Data Logic
does not work.
General problems
with an external AV
device connected to
the TV set.
Data Logic does not
work.
Possible cause
• The Data Logic video recorder
is not connected to the roof
antenna or cable outlet with a
suitable cable.
• The AV device has not been
registered in the TV set.
• The Data Logic video recorder
with data transfer has not been
registered correctly.
• The Scart cable does not have
all pins connected through.
Remedy
• Connect the Data Logic
video recorder to the
roof antenna or cable
outlet with a suitable
cable.
• Open the menu "AV
devices", select the devi-
ce with the cursor, set
the signal types
(OUT/IN) correctly and
press the key.
Make sure that you
connect the AV device
as shown in the
connection diagram.
• Open the menu "AV
devices" and register
the Data Logic video
recorder as video
recorder 1 with "Data
Logic On".
• Use a Scart cable in
which all pins are
connected through.
137