When The Showenvironment Command Is Executed In A Sixteen-Disk Capable Server, Even Though The Hard Disk Is Mounted In Slot #8, "Not Present" Is Output. (Cr 6772707) - Fujitsu SPARC Enterprise T5120 Product Notes

When the showenvironment Command is
Executed in a Sixteen-Disk Capable Server, Even
Though the Hard Disk is Mounted in Slot #8,
"NOT PRESENT" is Output. (CR 6772707)
This issue is resolved by updating the system firmware to 7.2.2.e or later.
When the showenvironment command of ALOM CMT compatible shell is
executed in a sixteen-disk capable server, even though the hard disk is mounted in
slot #8, "NOT PRESENT" is output.
For example:
sc> showenvironment
:
(Omitted.)
:
-----------------------------------------------------------------
System Disks:
-----------------------------------------------------------------
Disk Status
-----------------------------------------------------------------
/SYS/HDD0 OK
/SYS/HDD1 OK
/SYS/HDD2 OK
/SYS/HDD3 OK
/SYS/HDD4 OK
/SYS/HDD5 OK
/SYS/HDD6 OK
/SYS/HDD7 OK
/SYS/HDD8 NOT PRESENT
/SYS/HDD9 OK
/SYS/HDD10 OK
/SYS/HDD11 OK
/SYS/HDD12 OK
/SYS/HDD13 OK
/SYS/HDD14 OK
/SYS/HDD15 OK
:
(Omitted.)
:
sc>
Workaround: The status can be confirmed from the ok prompt by using the probe-
scsi-all command.
Service OK2RM
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
Appendix A Fixed Issues 107