Fujitsu SPARC Enterprise T5120 Product Notes page 45

Firmware, ILOM, POST, and SP Issues (Continued)
TABLE 3-3
CR Description
6815369 For DC input power models, /PS0/AC_POK
and /PS0/DC_POK identify sensors in the
power supply units. /PS0/AC_POK does not
represent an AC power supply unit. For
examples, see
/PS0/AC_POK Is Displayed (CR 6815369)" on
page 44.
6746677 According to the IPMI PET warning and SNMP
trap warning settings in the warning rule
settings, warning message creation may not be
possible depending on the event type,
irrespective of the warning level. All generated
events can be confirmed with show
/SP/logs/event/list or showlogs.
6806268 The flashupdate (ALOM CMT command)
with the -v option doesn't display the details of
the execution result.
The -v option exists to maintain compatibility
with the earlier ALOM. The -v option specified
doesn't affect the system firmware download
and update. The result shows no details and will
be the same as the execution result without the
option.
6823561 In the back up and restore functions of ILOM
settings, you cannot set "https" to the protocol
for data transfer (transfer_method
property).
Example:
-> set dump_uri=
https://ipaddres/directory/filename
set: Unable to transfer image,
please check URI
6830397 In ILOM3.0, you cannot set "service" to the
/HOST/diag mode property or the diag_mode
property of the ALOM CMT compatible shell. If
you set, it is displayed as "unknown."
"For DC Input Power Models,
Workaround
None.
None.
See "According to the IPMI PET Warning and
SNMP Trap Warning Settings in the Warning
Rule Settings, Warning Message Creation may
not be Possible Depending on the Event Type
(CR 6746677)" on page 45.
None.
None.
Use other protocols (tftp, ftp, sftp, scp, http).
None.
The following settings offer the POST diagnosis
in a mode equivalent to the "service."
/HOST/diag mode = normal
/HOST diag level = max
/HOST verbosity = max
Chapter 3 Known Issues 33