Fujitsu SPARC Enterprise T5120 Product Notes page 130

Fixed Solaris OS Issues (Continued)
TABLE A-4
CR Description
6586624 The Solaris prtdiag and prtpicl commands
might not display complete information, as
follows:
• If the prtdiag -v option is specified, the
firmware version and the chassis serial
number might not be displayed.
• The prtpicl command will not always
display the physical-platform section.
6586847 The Solaris prtdiag command without the -v
option does not show failures in the output.
6587389 The Solaris prtdiag -v command might
display information with missing spaces,
making the output difficult to read.
6588452 Booting the Solaris OS from an external USB
DVD-ROM drive could cause a panic and fail to
boot.
For more information, see
OS From an External USB DVD-ROM Drive
Could Cause a Panic (CR 6588452)" on page
6588550 The Solaris prtdiag -v command is slow to
respond on the SPARC Enterprise T5120 servers.
The command might take as long as 5 minutes to
display output and therefore appears to hang.
118 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Workaround
Note - Fixed in System Firmware 7.0.9 or later.
Use alternative methods to obtain the
information you need as described in
"Information Missing From prtpicl and
prtdiag Commands (CR 6586624)" on
page
You can also update the System Firmware to the
latest version to avoid encountering this issue.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Use the -v option when running the prtdiag
command.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Use the showenvironment command from the
ALOM CMT compatibility CLI as follows:
For more details, see
Command Has Formatting Issues (CR 6587389)"
on page
You can also upgrade the OS or install the patch
to avoid encountering this issue.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
"Booting the Solaris Use the built-in DVD drive, or use a drive whose
subclass is not 2, 3, or 4.
122.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
Note - Fixed in Solaris patch ID 139502-01 or
later.
Be aware of the delay, and wait for the output.
Do not perform a Control-C.
121.
sc> showenvironment
"The prtdiag -v
123.