Fujitsu SPARC Enterprise T5120 Product Notes page 105

Fixed Firmware, ILOM, POST, and SP Issues (Continued)
TABLE A-3
CR Description
6694475 It is impossible to use options of the showfru
command on the ALOM CMT compatibility
shell. All information will be displayed
regardless of the option specified.
showfru [-g lines] [-s|-d] [FRU]
-g: Only the specified line
-s: Only static information
-d: Only dynamic information
6694693 ILOM allows only two privileges: Administrator
and Operator. Therefore, the following text
about the ALOM CMT userperm command in
the manual is inappropriate.
If one of [c], [u], [a], and [r] is set, Administrator
authority will be in effect. If nothing is specified,
Operator authority will be in effect.
<Integrated Lights Out Manager 2.0 Supplement>
userperm [username] [c][u][a][r]
6738989 The SNMP tab of the ILOM Web interface does
not have an item for setting engineid.
6729474 -The powercycle command of the ILOM
browser interface does not secure sufficient time
for normal power-off of the system and may fail
to complete powercycle.
Workaround
Note - Fixed in System Firmware 7.1.6.d or later.
None
Note - Fixed in System Firmware 7.2.2.e or later.
None
Note - Fixed in System Firmware 7.2.2.e or later.
Use the "set /SP/services/snmp
engineid=(value)" command from the CLI to
set engineid.
Note - Fixed in System Firmware 7.2.2.e or later.
None.
Appendix A Fixed Issues 93