Fujitsu SPARC Enterprise T5120 Product Notes page 36

Hardware and Mechanical Issues (Continued)
TABLE 3-1
CR Description
n/a On service labels that show the locations of
PCIe and XAUI slots, the XAUI callouts are
wrong. They should point to the lower slots.
n/a The FM Status Indicator portion of the service
label has an erroneous statement. Where it says,
"In front of FM on FanBD" it should say, "on top
of FM".
n/a The drawing showing the cable management
arm being rotated represents the wrong server
model. It should show the SPARC Enterprise
T5220 server.
n/a The Fan Module Configuration portion of the
service label is wrong. It should show fan
modules in location FANBD1, FM1.
n/a The shapes of anti-tilt legs shown on service
labels may be different, depending on racks.
24 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Workaround
Note - This error appears on the service labels
for SPARC Enterprise T5220 servers.
Note - This error appears on the service labels
for SPARC Enterprise T5220 servers.
Note - This error appears on the service labels
for SPARC Enterprise T5220 servers.
Note - This error appears on the service labels
for SPARC Enterprise T5220 servers with 16-disk
capable backplanes.
Note - This error appears on the service labels
on all SPARC Enterprise T5120 and T5220
servers.