Fujitsu SPARC Enterprise T5120 Product Notes page 144

Procedure for Recovering a Boot Drive"s "drive type"
CODE EXAMPLE A-1
- change ' 5 ' partition
5
- change ' 6 ' partition
6
- change ' 7 ' partition
7
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> print
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag
0 root
1 swap
2 backup
3 unassigned wm
4 unassigned wu
5 unassigned wu
6 unassigned wu
7 unassigned wu
partition> quit
FORMAT MENU:
disk
type
partition - select (define) a partition table
current
format
repair
label
analyze
defect
backup
verify
save
inquiry
volname
!<cmd>
quit
format> disk
132 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Flag Cylinders
wm 825 - 3298
wu 0 - 824
wm 0 - 14086
3299 - 5772
0
0
0
0
- select a disk
- select (define) a disk type
- describe the current disk
- format and analyze the disk
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- set 8-character volume name The jumpstart install process
- execute <cmd>, then return
Size Blocks
12.00GB (2474/0/0)
4.00GB (825/0/0)
68.35GB (14087/0/0)
12.00GB (2474/0/0)
0 (0/0/0)
0 (0/0/0)
0 (0/0/0)
0 (0/0/0)
25175424
8395200
143349312
25175424
0
0
0
0