System expansions
Installing and removing two 2½ inch hard disk drives in a 5¼
inch installation frame capable of accommodating a hard disk
in a 5¼ inch bay
With the 5¼ inch installation frame capable of accommodating a hard disk, the installation and
removal procedures are almost identical to the procedures for installing and removing an accessible
5¼ inch drive. Special features are referred to below.
For the installation, you require the additional 3½ inch installation frame in which you install
i
both hard disks, see chapter "Installing and removing two 2½ inch hard disk drives in
additional 3½ inch installation frames".
Removing hard disk(s)
►
Remove the 5¼ inch installation frame in the same way as a 5¼ inch drive (see "Installing and
removing an accessible 5¼ inch drive").
1
►
Remove the screws (1).
►
Pull the 3½ inch installation frame with the two 2½ inch hard disks out of the 5¼ inch
installation frame in the direction of the arrow (2).
66
1
2
1
1
Fujitsu Technology Solutions