Fujitsu SPARC Enterprise T5120 Product Notes page 8

The showfaults Command Shows the Motherboard as Faulty Instead of the
The uadmin 2 0 and reboot Commands Read Old Bootmode Settings (CR
Domain ETM and LDC Deadlock When Transmit Queue Full (CR 6594506)
Spurious PIU Errors (CR 6598381) 104
Diagnostic Routine That Runs at Startup (IBIST) Might Accidentally
MCU Might Be Disconnected in DIMM Module Failure (CR 6656116) 106
When the showenvironment Command is Executed in a Sixteen-Disk
For DC Input Power Models, the Output From the showpower -v Command
In the Output From the prtdiag Command, Warnings May Be Displayed (CR
During the Power-On Self-Test, the Diagnostic Process May Terminate
On the DC Input Power Model, the "Environmental Status" and Some Part of
When the Service Processor Is Initialized, ILOM May Fails to Start With an
After the SCC Module Replacement, a Connection to the ILOM Network May
Solaris OS Issues 116
Servers Might Experience Panics Generated From the PCIe Root Complex (CR
Information Missing From prtpicl and prtdiag Commands (CR
Booting the Solaris OS From an External USB DVD-ROM Drive Could Cause
The prtdiag -v Command Has Formatting Issues (CR 6587389) 123
PSH Events Are no Longer Transported (CR 6594506) 124
viii SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
DIMM (CR 6582853) 99
6585340) 100
101
Disconnect the MCU (CR 6618773) 105
Capable Server, Even Though the Hard Disk is Mounted in Slot #8, "NOT
PRESENT" is Output. (CR 6772707) 107
May Differ Between /SYS/PS0 And /SYS/PS1 (CR 6802433) 109
6821325) 110
Halfway (CR 6835860) 111
the "FRU Status" Information Is Not Displayed (CR 6853843) 112
Error Message Displayed (CR 6856163) 113
Fail (CR 6857271) 115
6555956) 120
6586624) 121
a Panic (CR 6588452) 122