The Showfaults Command Shows The Motherboard As Faulty Instead Of The Dimm (Cr 6582853) - Fujitsu SPARC Enterprise T5120 Product Notes

2. Enter #. to escape to the SP ILOM CLI. The escape sequence is not echoed.
Solaris-host-prompt> #.
->
3. Enter the break command as follows.
-> set /HOST send_break_action=break
->
Log back into the Solaris host with the console command.
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.
c)ontinue, s)ync, r)eboot, h)alt?
Refer to the Integrated Lights Out Manager 2.0 User's Guide and the Integrated Lights
Out Management (ILOM) Supplement for SPARC Enterprise T5120 and T5220 Servers for
details on how to use the break command from the SP CLIs.
The showfaults Command Shows the
Motherboard as Faulty Instead of the DIMM (CR
6582853)
This issue is resolved by updating the system firmware to 7.1.6.d or later.
In a system with DIMMs or PCIe adapters that have been faulted by PSH (Predictive
Self-Healing) diagnosis on the host, the ALOM showfaults command displays the
faulty FRU as the motherboard (/SYS/MB) instead of the DIMM or PCIe adapter.
This problem will occur for the following PSH Message-IDs (MSGID):
SUN4V-8000-E2
■
SUN4V-8000-D
■
SUN4-8000-4P
■
SUN4-8000-A2
■
SUN4-8000-75
■
SUN4-8000-9J
■
SUN4-8000-D4
■
PCIEX-8000-0A
■
PCIEX-8000-DJ
■
Appendix A Fixed Issues 99