After A Host Power-On Instruction Is Executed From Ilom, The Post May Not Start, And Processing May Not Go To Os Boot Processing Or The Ok Prompt (Cr 6752910) - Fujitsu SPARC ENTERPRISE T5440 User Manual

ILOM-Related Issues on the SPARC Enterprise T5440 Server (Continued)
TABLE 3-4
CR ID Description
6857271 During SCC module replacement, part of the
data kept on the motherboard is inadvertently
overwritten with new SCC module data. This
results in a connection failure to the ILOM
network.
For details, see
Replacement, a Connection to the ILOM
Network May Fail (CR 6857271)" on page
6854379 After the replacement of motherboard, the
values for properties stored in the /HOST/diag
directory may not be carried over, even though
system configuration card (SCC module) is
moved to the new motherboard.
6723410 If you repeat in sequence a login to the service
processor, executing a command, and logging
out, logout may fail.
6816507 After mounted the 10GbE XAUI card, when you
insert the power cable, the component
information of the 10GbE XAUI card does not
appear on ILOM. ILOM recognized the 10GbE
XAUI card.
After a Host Power-On Instruction is Executed
from ILOM, the POST May Not Start, and
Processing May Not Go to OS Boot Processing or
the ok Prompt (CR 6752910)
After a host power-on instruction is executed from ILOM, the POST (self-diagnostics
test) may not start, and processing may not go to OS boot processing or the ok
Prompt for OpenBoot PROM (OBP).
[ILOM command interface operation example]
-> start /SYS
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
"After the SCC Module
Workaround
If only the SCC module fails, replace the SCC
module together with the motherboard.
After replacing these components, restore the
backed up contents.
42.
None.
Before replacing the motherboard, back up the
ILOM settings. After the replacement, restore the
backed up settings.
If this problem occurs, terminate the login
session on the client from which you have
accessed the service processor.
None.
To confirm the component information of the
10GbE XAUI card from ILOM, check it after you
power on the host.
To stop, type #.
Chapter 3 Known Issues 35