Fujitsu SPARC Enterprise T5120 Product Notes page 142

Procedure for Recovering a Boot Drive"s "drive type"
CODE EXAMPLE A-1
Format will now present the following menu, choose 0. Auto configure
AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
[...]
17. Zip 250
18. Peerless 10GB
19. other
Specify disk type (enter its number): 0
c0t0d0: configured with capacity of 68.35GB <======= drive type corrected
<SUN72G cyl 14087 alt 2 hd 24 sec 424> <======= drive type corrected
selecting c0t0d0
[disk formatted]
Following Auto configure, the correct drive value should be reported.
FORMAT MENU:
disk
type
partition - select (define) a partition table
current
format
repair
label
analyze
defect
backup
verify
save
inquiry
volname
!<cmd>
quit
format> label
Ready to label disk, continue? y
format> quit
root@ #
130 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
- select a disk
- select (define) a disk type
- describe the current disk
- format and analyze the disk
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- set 8-character volume name The jumpstart install process
- execute <cmd>, then return