An Error is Registered with the showfaults
Command When Running POST, But POST Ends
Normally (CR 11210193)
If an error occurs during POST execution, "Fault Sensor VCORE_POK at
/SYS/MB deasserted" may be registered when the showfaults ALOM CMT
compatibility command is used for status confirmation. However, POST will still
end normally in this case.
sc> showfaults -v
Last POST Run: Sun Apr 20 17:53:36 2008
Post Status: Passed all devices
ID Time
VCORE_POK at /SYS/MB
deasserted
sc>
Workaround: None. If this problem occurs, use the resetsc ALOM CMT
compatibility command to clear the log and reset the LED display.
48
SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
1 Apr 19 06:41:14 /SYS/MB
FRU
Class
Fault
SP detected fault: Fault Sensor