Fujitsu SPARC Enterprise T5120 Product Notes page 97

Sparc enterprise servers
Hide thumbs Also See for SPARC Enterprise T5120:
Table of Contents

Advertisement

Fixed Firmware, ILOM, POST, and SP Issues (Continued)
TABLE A-3
CR
Description
6589043
If there are fewer than 21 entries in the event
log, the showlogs command displays none of
the events.
This situation is known to occur in the following
scenarios:
• After a fresh installation of the system (out-of-
box), the service processor (SP) event log is
very likely to have fewer than 21 entries.
• After you clear the SP event log with the
browser interface (BI), or ILOM CLI, the
ALOM CMT compatibility CLI showlogs
command displays no new events until at
least 21 new events are logged.
6591367
You cannot obtain the system DIMM FRU
information with the ipmitool utility.
6593547
An erroneous watchdog reset error might occur.
If this error occurs, the system will not complete
the boot sequence. You might see the following
error in either the I/O or the Control domain
when attempting to boot and the boot sequence
will be aborted:
"ERROR: Last Trap: Watchdog
Reset".
6593801
When all platform identity checks fail, system
power on should be disabled. If enough of the
FRUs are corrupted, the system cannot
determine its identity, which makes certain
components nonoperational and could crash the
server.
6594506
Domain ETM and LDC Deadlock When
Transmit Queue Full
For examples, see
Deadlock When Transmit Queue Full (CR
6594506)" on page
"Domain ETM and LDC
101.
Workaround
Note - Fixed in System Firmware 7.1.6.d or later.
Use the showlogs -v option to display the logs.
After 21 or more events are logged in the log file,
you can revert back to using showlogs with no
options.
You can also update the System Firmware to the
latest version to avoid encountering this issue.
Note - Fixed in System Firmware 7.1.6.d or later.
Obtain the DIMM FRU information using the SP
ALOM CMT compatibility CLI (with the
showfru command) or the SP ILOM CLI (with
the show fru-name command). Refer to the
Integrated Lights Out Management (ILOM)
Supplement for SPARC Enterprise T5120 and T5220
Servers for details.
You can also update the System Firmware to the
latest version to avoid encountering this issue.
Note - Fixed in System Firmware 7.1.6.d or later.
The error is erroneous and can be ignored.
Type boot at the ok prompt to proceed.
You can also update the System Firmware to the
latest version to avoid encountering this issue.
Note - Fixed in System Firmware 7.1.3.d or later.
Note - Fixed in Solaris patch ID 125369-12 or
later.
See
"Domain ETM and LDC Deadlock When
Transmit Queue Full (CR 6594506)" on page
Appendix A
101.
Fixed Issues
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise t5220

Table of Contents