Installation Overview - Sun Microsystems Fire X4600 Installation Manual

Hide thumbs Also See for Fire X4600:
Table of Contents

Advertisement

Installation Overview

Note: The information and procedures in this document apply to the Sun Fire X4600 and
X4600M2 server unless otherwise noted in the text.
After unpacking your server, perform the following steps.
To avoid serious personal injury and equipment damage, always use all four chassis
Caution –
handles to support the product weight when handling or moving the product.
Task
Description
1. Familiarize yourself
with the server
features.
2. Install the server
into a rack using slide
rails.
3. Connect power
cords, cables, and
peripherals.
4. Power on the server.
5. Check system
specifications.
6. Manage the server.
7. Configure or install
Configure the optional preinstalled
an OS:
Solaris OS.
Link
"Sun Fire X4600/X4600 M2 Server Front
and Back Panel Features and
Components" on page 11
"Installing the Server Hardware" on
page 15
"Cabling Diagram" on page 33
"How to Apply Standby Power for Initial
Service Processor Configuration" on
page 35
"Sun Fire X4600/X4600 M2 Server Server
Specifications" on page 41
"Managing Your Server" on page 43
"Communicating With the ILOM and the
System Console" on page 45
"Setting Up Your Operating System" on
page 59
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fire X4600 and is the answer not in the manual?

This manual is also suitable for:

Fire x4600 m2

Table of Contents