Speech Processor - Icom IC-F8100 Instruction Manual

ï Checking the MIC level
The transceiver has a MIC level meter. You can check the
after adjusting the Microphone
MIC level before or
gain.
[�] [Default] [�]
ï Speech Processor
The IC-F8100 has a built-in, low distortion Speech
Processor circuit. This circuit increases your average
talk power in the SSB mode and is especially useful
when the receiving station is having difficulty hearing
your audio.
[�] [Default] [�]
/
/
RECEIVE AND TRANSMIT
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "Admin Menu," and
then push [4].
e Push [r] or [s] to select "Meter Type."
r Push u to select "MIC LEVEL."
[ ](§§§)
t Push [MENU](HOME) twice to return to the nor-
mal operating screen.
y Hold down [PTT] on the microphone, and speak
into the microphone at a normal voice level.
u While speaking into the microphone, check the TX
meter reading.
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "User Menu," and
then push [4].
e Push [r] or [s] to select "Speech Processor."
r Push t u
[ ](§) or [ ](§§§)
sor function ON or OFF.
• Hold down [Default](§§) for 1 second to return to the
default setting.
t Push [MENU](HOME) twice to return to the nor-
mal operating screen.
y Push one or more times to select the
[Mode](§§)
USB or LSB mode.
u Hold down [PTT] on the microphone, and speak
into the microphone at a normal voice level.
to turn the Speech proces-
3
3
14