Removing And Replacing The Digital Operator; Removing And Replacing The Front Cover - Saftronics FP5 Series User Manual

efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
Chapter 1 - Receiving & Installation
Mounting

Removing and Replacing the Digital Operator

To remove the digital operator from the front cover, push the operator
lever in the direction shown by arrow 1 and lift the digital operator in the
direction shown by arrow 2 (see Figure 4).
To replace the digital operator, engage the operator onto retaining tabs A
in the direction shown by arrow 1 and then onto retaining tabs B in the
direction shown by arrow 2, locking the digital operator into place (see
Figure 5).
Front Cover
Digital Operator
Figure 4 Removing the Digital Operator

Removing and Replacing the Front Cover

To remove the front cover, first remove the digital operator (see previous
section). Then squeeze the cover on both sides in the direction shown by
arrows 2 and lift the cover in the direction shown by arrow 3.
14
2
1
Front Cover
Figure 5 Replacing the Digital Operator
Front Cover
2
3
2
Figure 6 Removing and Replacing the Front Cover
Digital Operator
2
1
Retaining
Tabs A
Retaining
Tabs B
1
FP5/GP5 User's Manual