Saftronics FP5 Series User Manual page 96

efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
Appendix A-2
Digital Operator Monitor Display
Name
(LCD Operator Display)
Monitor
(Monitor U-XX)
Acceleration Time 1
(Accel Time 1)
Deceleration Time 1
(Decel Time 1)
V/f Pattern Selection
(V/f Selection)
Frequency Reference Gain
(Terminal FV Gain)
Frequency Reference Bias
(Terminal FV Bias)
Motor Rated Current
(Motor rated FLA)
PID Selection
(PID Mode)
Energy Saving Selection
(Energy sav Sel)
PRGM Mode
(Parameter nXXX)
FP5/GP5 User's Manual
Description
U-09 Last 4 faults are displayed.
U-10 Last 4 digits of software revision number are displayed.
Elapsed time is displayed as follows:
X X X X X X
U-11
U-12
U-13 PID feedback is displayed in units of 0.1Hz.
U-15 Kilowatt-hour meter (4 least significant digits)
U-16 Kilowatt-hour meter (2 most significant digits)
Acceleration time 1 (n018) can be set/read in units of 0.1s
(1s for 1,000s and above).
Deceleration time 1 (n019) can be set/read in units of 0.1s
(1s for 1,000s and above).
V/f pattern selection (n010) can be set during stop.
Frequency reference gain (n048) can be set during stop.
Frequency reference bias (n049) can be set during stop.
Motor rated current (n033) can be set during stop.
PID selection (n084) can be set during stop.
Energy saving selection (n096) can be set during stop.
Parameters can be set/read during stop.
Elapsed time (in units of 1 hour)
U-10 (last 4 digits)
U-11 (first 2 digits)
279,620 hours maximum
96