Saftronics FP5 Series User Manual page 98

efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
Appendix A-3
CE Conformance
CE CONFORMANCE - Electro-Magnetic Compatibility (EMC) Compliance
In order to conform to EMC standards, exclusive-use methods are required for line filter
application, cable shielding and inverter installation. An outline of the methods follows.
The line filter and the inverter must be mounted on the same metal plate. The filter
should be mounted as close to the inverter as practical. Keep cable as short as possible.
The metal plate should be securely grounded. The ground of the line filter and inverter
must be bonded to the metal plate with as much area as possible.
For line power input cable, screened cable is recommended at least within the panel.
The screen of the cable should be connected to a solid ground. For the motor cable,
screened cable (max. 20m) must be used and the screen of the motor cable is connected
to ground at both ends by a short connection, using as large an area as practical.
The following table and figures show the line filter list for EMC standards and the
installation/wiring of inverter and line filter.
Inverter
Model
CIMR-
P5Uxxxx
40P4
40P7
41P5
42P2
43P7
44P0
45P5
47P5
4011
4015
4018
4022
4030
4037
4045
4055
4075
4110
4160
4185
4220
4300
FP5/GP5 User's Manual
Line Filter List for EMC Standards
Line Filter (Manufactured by Schaffner)
Rated
Model Current
(A)
FS4874-7/07 7
FS4874-18/07 18
FS4874-30/07 30
FS4874-42/07 42
FS4874-55/07 55
FS4874-75/34 75
FS4874-100/35 100
FS4874-130/35 130
FS4874-180/07 180
FS4874-300/99 300
FS4874-400/99 400
FS4874-500/99 500
FS4874-600/99 600
FS4874-900/99 900
Mass Dimensions (mm)
W × D × H
(kg)
50 × 126 × 255
1.1
55 × 142 × 305
1.7
60 × 150 × 335
1.8
70 × 185 × 329
2.8
80 × 185 × 329
3.1
80 × 220 × 329
4.0
90 × 220 × 379
5.5
110 × 240 × 429
7.5
110 × 240 × 438
11
300 × 564 × 160
15
300 × 564 × 160
22
300 × 564 × 160
19.5
300 × 564 × 160
20.5
300 × 564 × 160
33.5
98