Fp5/Gp5 Parameters (N001~N116); Description - Saftronics FP5 Series User Manual

efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor

3.1 FP5/GP5 Parameters (n001~n116)

No. Function Name
(LCD Operator Display)
n001 Parameter selection/
initialization
(Password)
n002 Operation mode selection
(Oper Mode Select)
n003 Input voltage
(Input Voltage)
n004 Stopping method
(Stopping Method)
n005 Motor rotation
(Motor Rotation)
n006 Prohibit reverse operation
(Reverse Oper)
n007 Local/remote key function
(Local/Remote Key)
n008 Stop key function
(Oper STOP Key)
n009 Frequency reference set-
ting method from operator
(Operator MOP)
n010 V/f pattern selection
(V/f Selection)
n011 Maximum frequency
(Max Frequency)
n012 Maximum voltage
(Max Voltage)
n013 Base frequency
(Base Frequency)
FP5/GP5 User's Manual
Chapter 3 - Programming Features
FP5/GP5 Parameters

Description

0: n001 read and set, n002~n116 read only
1: n001~n035 read and set, n036~n116 read only
2: n001~n053 read & set, n054~n116 read only
3: n001~n116 read and set
4, 5: Not used
6: 2-wire initialization (Japanese specifications)
7: 3-wire initialization (Japanese specifications)
8: 2-wire initialization (American specifications)
9: 3-wire initialization (American specifications)
LED Setting LCD Setting Operation
0 SEQ=OPR REF=OPR Operator
1 SEQ=TRM REF=OPR Terminal
2 SEQ=OPR REF=TRM Operator
3 SEQ=TRM REF=TRM Terminal
4 SEQ=OPR REF=COM Operator
5 SEQ=TRM REF=COM Terminal
6 SEQ=COM REF=COM Serial com
7 SEQ=COM REF=OPR Serial com
8 SEQ=COM REF=TRM Serial com
Unit: 0.1V
Setting range: 150.0~255.0V (510V for 460V units)
LED Setting LCD Setting Description
0 Ramp to stop Ramp to stop
1 Coast to stop Coast to stop
2 Coast w/Timer1 Coast to stop with timer
(Run command cycle)
3 Coast w/Timer2 Coast to stop with timer
(auto-start after time out)
LED Setting LCD Setting Description
0 Rotate C.C.W. CCW shaft rotation
1 Rotate C.W. CW shaft rotation
LED Setting LCD Setting Description
0 Rev Allowed Reverse operation enabled
1 Rev Prohibited Reverse operation disabled
LED Setting LCD Setting
0 Disabled
1 Enabled
LED Setting LCD Setting Description
0 Disabled Stop key is disabled when
operated from terminals
1 Enabled Stop key is always enabled
LED Setting LCD Setting
0 Enter not used
1 Enter key used
LED Setting LCD Setting Description
0 User Defined V/f Custom V/f pattern
(n011 ~ n017 can be set)
1 60 Hz Preset Fixed V/f pattern
Unit: 0.1Hz
Setting range: 50.0~400.0Hz
Unit: 0.1V
Setting range: 0.1~255.0V (510V for 460V units)
Unit: 0.1Hz
Setting range: 0.2~400.0Hz
Factory User Ref.
Default Setting Page
1 49
Reference
SEQ=TRM 37
Operator
REF=TRM
Operator
Terminal
Terminal
Serial com
Serial com
Serial com
Operator
Terminal
230.0V -
(460.0V)
Ramp to 70
Stop
Rotate -
C.C.W.
Rev 68
Allowed
Enabled 37
Enabled -
Enter -
key
used
75,96
60 Hz
Preset
60.0Hz 76
230.0V 76
60.0Hz 76
41