Removing And Replacing The Digital Operator; Removing And Replacing The - Saftronics CIMR-VG5U Installation & Quick Start Manual

Chapter 1 - Receiving & Installation
Mounting
Digital Operator
Front Cover
Removing and Replacing the Front Cover
Front Cover
2
14
1
2
Figure 5 Replacing the Digital Operator
3
2
Figure 6 Removing and Replacing the Front Cover
To replace the digital operator,
engage the operator onto the A
tabs in the direction shown by
B Claws
arrow 1 and then press the
operator onto the B tabs in the
direction shown by arrow 2,
A Claws
locking the digital operator into
place.
1
To remove the front cover, first
remove the digital operator (see
previous section). Then
squeeze the cover on both sides
in the direction shown by
arrows 2 and lift the cover in
the direction shown by arrow 3.
VG5 Installation & Quick-Start Manual