Interface; Reset Menu - Brother HL-6050 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
4.5.7

Interface

Setting Menu
SELECT
AUTO IF TIME
INPUT BUFFER
PARALLEL
USB 2.0
4.5.8

Reset menu

Setting Menu
RESET PRINTER
FACTORY RESET
Description
=ATUO / PARALLEL / USB / NETWORK
= 1, 2, 3 ... 99 (sec)
You need to set the time-out period for the auto interface
selection.
= Level 1, 2, 3 ... 15
Increases or decreases the
input buffer capacity.
When using the parallel interface
Sub-setting Menu
HIGH SPEED
BI-DIR=ON/OFF
INPUT PRIME
HIGH SPEED
Description
Resets the printer and restores all printer settings (including
command settings) to settings you have previously made with
the control panel buttons.
Resets the printer and restores all printer settings (including
command settings) to the factory settings.
4.5.11 'List of factory settings' in this
2-26
RESTART PRINTER?
Description
=ON / OFF
Turns high-speed parallel
communications ON or OFF..
=ON / OFF
Turns bi-directional parallel
communications ON or OFF.
=ON / OFF
Turns prime signal ON or OFF.
=ON / OFF
Turns High-Speed USB 2.0
communications ON or OFF.
See subsection
Chapter.