Panel Switches Functions; Go Button; Job Cancel Button - Brother HL-6050 Service Manual

4.2

Panel Switches Functions

You can control the basic printer operations and change various printer settings with 7 buttons
(Go, Job Cancel, Reprint, +, -, Set, Back).
Key
Go
Job Cancel
Reprint
+
-
Set
Back
4.2.1

Go button

The panel indications can be changed from the current status (MENU, ERROR and REPRINT
settings) by pressing the Go button once. For ERROR indications, the control panel changes
when the error is cleared.
You can pause printing with the Go button. Pressing the Go button again restarts the print job
and clears the pause. During a pause, the printer is in the off-line.
NOTE:
If the printer is in pause mode and you do not want to print the data that is left, you can cancel
the job by pressing Job Cancel button. Once the job has been cancelled the printer will return
to the READY state.
4.2.2

Job Cancel button

You can cancel the processing or printing of data with the Job Cancel button. The display
shows "
JOB CANCELLING
returns to the "
READY
shows "
NO DATA!!!
Function
Exit from the control panel menu, reprint settings and error messages.
Pause / Continue printing.
Stop and cancel the printer job in progress.
Select the number of extra copies. (1-999)
Move forward and backward through menus.
Move forward and backward through the available options.
Select the control panel menu.
Set the selected menus and settings.
Go back one level in the menu.
" until the job is cancelled. After canceling the job, the printer
" state. When the printer is not receiving data or printing, the display
" and you cannot cancel the job.
2-9
HL-6050/6050D/6050DN SERVICE MANUAL