Backlights; Printer Status Messages - Brother HL-6050 Service Manual

4.3.1

Backlights

The backlight of the LCD shows the current printer status with the different colors and the light
indications (on, off and blinking).
Signal
Off
Green (General)
Red (Error)
Orange (Setting)
4.3.2

Printer status messages

The following table shows the printer status messages that are displayed during normal
operation:
Printer Status Message
IGNORE DATA
JOB CANCELLING
NOW INITIALIZING
PAUSE
PRESS SET TO PRINT
PRINTING
PROCESSING
PROGRAMING-WAIT
RAM SIZE=XX MB
READY
RESET TO FACTORY SETTING
RESET TO USER SETTING
RESOLUTION ADAPT
SELF TEST
SLEEP
WARMING UP
Status
The printer is power off or in sleep status.
Warming up
Ready to print
Printing
Job cancelling
There is a problem with the printer.
The printer is off-line.
Choosing a menu.
Setting Reprint times
Pause
Meaning
Printer is ignoring data processed using PS driver.
Cancelling the job.
The printer is setting up.
The printer has suspended its operations. Press the
Go button to start the printer again.
Press the Set button to start printing.
Printing.
Busy processing data.
Accessing CompactFlash card.
This printer has XX MB memory.
Ready to print.
The printer settings returns to the factory settings.
The printer settings returns to the user settings.
Printing with reduced resolution.
Performing self-diagnostics.
In sleep state.
The printer is warming up.
2-15
HL-6050/6050D/6050DN SERVICE MANUAL