Brother HL-6050 Service Manual page 114

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(5) Remove the three cup B M3x8 Taptite screws, and remove the panel PCB ASSY.
(6) Disconnect the connector of back light PCB harness and LCD harness from the panel
PCB ASSY.
Back light PCB harness
Back light PCB ASSY
(7) Release the two hooks, and remove the LCD holder.
Hook
LCD
Fig. 4-23
Hooks
Fig. 4-24
4-14
Taptite, cup B M3x8
Panel PCB ASSY
LCD harness
Top cover
LCD holder
Top cover