3.39
Ejection Solenoid ASSY
(1) Disconnect the connector from the relay PCB R ASSY.
(2) Remove the three cup S M3x6 Taptite screws, and remove the ejection gear plate unit.
Ejection gear plate unit
Taptite, cup S M3x6
(3) Remove the flanged M3x3.5 screw, and remove the ejection solenoid ASSY.
(4) Remove the solenoid damper from the ejection solenoid lever.
NOTE:
Remove the solenoid damper as shown in the figure.
Ejection gear plate unit
Relay PCB
R ASSY
Fig. 4-91
Screw, flanged M3x3.5
Ejection solenoid ASSY
Fig. 4-92
4-49
HL-6050/6050D/6050DN SERVICE MANUAL