Brother HL-6050 Service Manual page 130

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(30) Remove the two open cover springs.
(31) Release the two hooks and two pins, and remove the open cover.
(32) Disconnect the connector of the thermistor C.
(33) Remove the bind M3x4 screw, and remove the fixing sensor PCB ASSY.
Fixing unit
Hook
Pin
Screw, bind M3x4
Fixing unit
Thermistor C
2
Open cover
1
Open cover springs
Fig. 4-54
Fixing sensor PCB ASSY
Fig. 4-55
4-30
Hook
1
Pin