Paper Eject; Duplex Printing (Hl-6050D/6050Dn Only) - Brother HL-6050 Service Manual

2.2.5

Paper eject

After the printing image on the photosensitive drum is transferred onto the paper, the paper is
fed to the fixing unit to fix unfixed toner onto the paper.
Afterwards, the paper is ejected from the fixing unit by the first eject roller in the fixing unit.
The paper eject actuator detects whether the paper is ejected correctly or not.
After the paper exits from the first eject roller, the paper is turned by the rear cover and
ejected face down into the top output tray through the second eject roller. If the rear cover is
open, the paper is ejected face up straight to the printer rear (straight paper path).
2.2.6

Duplex printing (HL-6050D/6050DN only)

After the paper exits from the second eject roller with the front of sheet printed, the second
eject roller rotates conversely and feeds the paper to the duplex tray, where the paper skew is
adjusted.
Afterwards, the paper is ejected from the duplex tray to the path through the paper feed roller
and the transfer roller to the transfer block in the drum unit again for process of printing on the
back of sheet.
Heat roller 34
Pressure roller 30
Fixing sensor actuator
Fig. 3-25
3-21
HL-6050/6050D/6050DN SERVICE MANUAL
Exit roller
Pinch roller
Outer chute
Rear cover
Eject roller