CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.18
Fan Motor 80 ASSY
(1) Disconnect the connector from the engine PCB.
(2) Remove the two cup S M3x6 Taptite screws, and remove the fan motor 80 unit.
(3) Release the four hooks, and remove the fan holder A.
(4) Remove the fan motor 80 ASSY from the fan holder B.
Fan motor 80 unit
Taptite, cup S M3x6
Engine PCB
Hooks
Fig. 4-62
Fan holder A
Fan motor 80 ASSY
Fan holder B
Fig. 4-63
4-34
Hooks