Using The Wlan Interface (Optional:pa-Wi-001) (Td-2120N/2130N Only); Installing The Printer Driver And Software; Before Making A Wireless Lan Connection - Brother TD-2120N TD-2130N TD-2120NW User Manual

Using the WLAN Interface
11
(Optional:PA-WI-001)
(TD-2120N/2130N only)
Installing the Printer
Driver and Software
The printer driver and software can be
installed using any of the following three
method.
 USB cable connection
 Wired LAN connection (TD-2120N/2130N
only)
 Wireless LAN connection
(TD-2120N/2130N only) (if the WLAN
interface is attached)
The following describes the procedure for
making a wireless LAN connection.
Before specifying settings, see Installing the
Printer Driver and Software on page 4 and
Installer Screen on page 5.
To make a USB cable connection or wired
LAN connection, see USB Cable Connection
on page 5 and Wired LAN Connection
(TD-2120N/2130N only) on page 7.
Before Making a Wireless LAN
Connection
In order to use a wireless LAN connection,
the WLAN interface (optional) must be
attached to the printer. For details on
attaching the WLAN interface (optional), see
its instruction manual.
Before making a wireless LAN
connection, make sure that the network
cable is not connected to the printer.
Required Devices and Network
Configuration
This section provides a description of the
11
procedure for making a connection in the
following network configuration
(infrastructure mode).
 Infrastructure mode
4
1 WLAN access point/router
2 This printer
3 Wireless-capable computer
connected to the access point/router
4 Wired computer
connected to the access point/router
5 Mobile phone, such as a smartphone
11
11
11
5
1
2
3
93
11