Advertisement
Quick Links
Download this manual
See also:
User Manual
Brother Laser Printer HL-600 Series Quick Setup Guide
Read this guidebook first to set up your printer.
Action 1: Getting Started
Check the Supplied Items
After taking the printer out of the carton and removing the packing materials, make sure that
the following items are not damaged and none are missing:
• Printer
• Drum unit
3.5" floppy disks for DOS/Windows
Software setup guide
Quick setup guide (this guidebook)
User's guide
Plastic Bag
NOTE
The 3.5" floppy disks for the Macintosh printer driver is included in some countries.
You will need to purchase an interface cable that matches the interface of your computer. If
you do not know what cable you need, consult your dealer.
The product names in this guidebook are trademarks or registered trademarks of each manufacturer. The specifications are subject to change without notice.
© 1994 Brother Industries, Ltd.
• Multi-purpose sheet feeder
• Toner cartridge
®
UL5455001 C Printed in Japan
1
Advertisement
Related Manuals for Brother HL-630
Summary of Contents for Brother HL-630
- Page 1 Read this guidebook first to set up your printer. Action 1: Getting Started Check the Supplied Items After taking the printer out of the carton and removing the packing materials, make sure that the following items are not damaged and none are missing: • Printer •...
-
Page 2: Action 2: Install The Toner Cartridge / Drum Unit
Open the top cover. Open the drum cover by pushing the two blue tabs in toward the center of the unit and lifting the cover toward you. Install the drum unit into the printer. Make sure that you gasp the marks. - Page 3 Unpack the toner cartridge and gently rock it from side to side five or six times before installing. ( Then, remove the protective parts.( CAUTION DO NOT MOVE THE SHUTTER LEVER UNTIL THE CARTRIDGE IS INSTALLED. Install the toner cartridge into the drum unit.
-
Page 4: Action 3: Load Paper Into Your Printer
Action 3: Load Paper into Your Printer Install the paper support into the multi- purpose sheet feeder. ( ) Install the sheet feeder into the printer. ( ) Open the multi-purpose sheet feeder cover. Load paper in the multi-purpose sheet feeder. - Page 5 The printer can handle paper that has the following specifications. Paper Type Paper Size Cut sheet A4, Letter, Legal, B5, A5, 3”x5”, Executive, Custom size (70-216 x 127-356 mm) Envelopes DL, C5, COM-10, Monarch Post Card 70-216 x 127-356 mm Organizer Day-Timer®, J,K,L M...
- Page 6 Action 4: Connect Your Printer and Computer You must connect the printer to your computer using an interface cable. A parallel cable is used for this connection. NOTE The printer can also operate with an RS-232C/RS-422A serial interface by installing the optional serial interface board.
-
Page 7: Action 5: Plug In And Turn On Your Printer
We recommend that you print a test page. Refer to the instructions below. NOTE If the printer does not print a test sample page exactly, see “CHAPTER 6 Troubleshooting - Q & A” of the User’s Guide. If after reviewing the information in the User’s Guide, your printer still cannot print the test sample page exactly, consult your dealer. - Page 8 Shipment of the Printer If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during transit. It is recommended that you save and use the original packaging. The Printer should also be adequately insured with the carrier.