CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.38
DX Sensor PCB
(1) Remove the three bind B M4x10 Taptite screws and cup S M3x6 Taptite screw, and
remove the base plate.
(2) Disconnect the connector from the sensor relay PCB ASSY.
Tray guide left rear ASSY
Taptite, bind B M4x10
Base plate
Taptite, cup S M3x6
(3) Remove the three cup S M3x6 Taptite screws, and remove the tray guide left rear ASSY.
(4) Remove the bind M3x8 Taptite screw, and remove the DX sensor PCB.
DX sensor PCB
Fig. 4-89
Taptite, cup S M3x6
Fig. 4-90
4-48
Connector
Sensor relay PCB ASSY
Taptite, cup S M3x6
Tray guide left rear ASSY
DX sensor PCB
Taptite, bind M3x8