Brother HL-6050 Service Manual page 110

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
NOTE:
Be sure that both boss and pin are inserted before mounting the side regist roller holder.
Left guide plate ASSY
(8) Remove the two bind B M3x8 Taptite screws, and remove the two guide plate stopper.
(9) Remove the two left guide spring 2 from the DX feed ASSY.
(10) Release the hook, and remove the side regist guide.
Pin
Taptite, bind B M3x8
DX feed ASSY
Fig. 4-15
Guide plate stopper
DX feed ASSY
(Back side)
Left guide spring 2
2
1
Side regist guide
Fig. 4-16
4-10
Side regist roller holder
Boss
Hook