Brother HL-6050 Service Manual page 54

CHAPTER 2 INSTALLATION AND BASIC OPERATION
HP LASERJET
Sub-setting
FONT NO.
FONT
PITCH/POINT
SYMBOL SET
TABLE PRINT
AUTO LF
AUTO CR
AUTO WRAP
AUTO SKIP
LEFT MARGIN
RIGHT MARGIN
TOP MARGIN
BOTTOM MARGIN
LINES
2-22
Description
=I000...####
=##.##
PC-8 / ...
Sets the symbol set or the character set.
Prints code table
=OFF / ON
ON: CR CR+LF,
OFF: CR CR
=OFF / ON
ON: LF LF+CR, FF+CR,
or VT VT+CR
OFF: LF LF, FF FF, or VT VT
=OFF / ON
Selects whether a line feed and carriage
return will happen when the printer
reaches the right margin.
=ON / OFF
Selects whether a line feed and carriage
return will happen when the printer
position reaches the bottom margin.
=##
Sets the left margin at column 0 to 70
columns at 10 cpi.
=##
Sets the right margin at column 10 to 80
columns at 10 cpi.
=#.##
Sets the top margin at a distance from
the top edge of the paper:
0, 0.33, 0.5, 1.0, 1.5 or 2.0.
The factory setting is 0.5.
=#.##
Sets the bottom margin at a distance
from the bottom edge of the paper:
0, 0.33, 0.5, 1.0, 1.5 or 2.0.
The factory setting is 0.33 (None-HP),
0.5 (HP).
=###
Sets the number of lines on each page
from 5 to 128 lines.