Pe/Po Sensor Pcb Assy - Brother HL-6050 Service Manual

3.45

PE/PO Sensor PCB ASSY

(1) Remove the four cup S M3x6 Taptite screws, and remove the under bar.
(2) Remove the bind B M3x8 Taptite screws, and remove the tray sensor PCB holder.
(3) Release the two hooks, and remove the PE/PO sensor PCB ASSY.
PE/PO sensor PCB ASSY
Under bar
Hook
Fig. 4-99
4-53
HL-6050/6050D/6050DN SERVICE MANUAL
Taptite, cup S M3x6
(Take out screws for the other side, too.)
Taptite, bind B M3x8
Tray sensor PCB holder
Hook