Paper Tray Capacity; Print Delivery - Brother HL-6050 Service Manual

CHAPTER 1 GENERAL
• It is recommended to use labels or transparencies which are designed for use in laser
printers.
• Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged.
• Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
• Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the printer.
• When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
• Different types of paper should not be loaded at the same time in the paper tray to avoid
any paper jams or misfeeds.
3.5.2

Paper tray capacity

Paper
Capacity
3.5.3

Print delivery

(1) Face down output tray
capacity:
(2) Face up output tray
capacity:
NOTE:
Face-down:
Face-up:
(3) You must use the face-up output tray for certain print media. We recommend that you
use face-up printing when you print on transparencies.
Media type
Plain paper
Recycled paper
Bond paper
Thick paper
Transparency
Labels
Envelope
Card stock
Thin paper
Paper Tray
(Standard)
500 sheets 100 sheets
(80 g/m
2
(80 g/m or 20 lb)
Maximum 250 sheets (80 g/m
face down only
Maximum 50 sheets (80 g/m
face up only
Delivery with the printed face of the paper downwards.
Delivery with the printed face of the paper upwards.
Paper output
Face down
O
O
O
O
O
O
Multi-purpose
Optional lower tray
tray
500 sheets
2
or 20 lb)
(80 g/m
2
)
2
)
Face up
O
O
O
O
O
O
O
O
O
1-10
2
or 20 lb)