Lvps - Brother HL-6050 Service Manual

3.23

LVPS

(1) Remove the four cup S M3x6 Taptite screws, and remove the main IF plate.
(2) Pull out the connector from the connector blacket.
(3) Remove the pan (washer) M3.5x6 screws, and remove the ground wire.
Main IF plate
Taptite, cup S M3x6
Taptite, cup S M3x6
(4) Remove the two cup S M3x6 Taptite screws, and remove the inlet unit.
(5) Remove the four cup S M3x6 Taptite screws, and remove the LVPS.
Taptite, cup S M3x6
Inlet unit
Taptite, cup S M3x6
Taptite, cup S M3x6
Connector
Screw, pan (washer) M3.5x6
Fig. 4-68
Fig. 4-69
4-37
HL-6050/6050D/6050DN SERVICE MANUAL
Cable clamp
Ground wire
LVPS