Panel Switches Functions; Go Switch; Job Cancel Switch - Brother HL-1850 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
5.2

Panel Switches Functions

You can control the basic printer operations and change various printer settings with 7 control
panel switches (Go,
Key
Go
Job Cancel
Reprint
+
-
Set
Back
5.2.1

Go switch

The panel indications can be changed from the current status (MENU, ERROR and REPRINT
settings) by pressing the Go switch once. For ERROR indications, the panel changes only
when the error is cleared.
You can PAUSE printing with the Go switch. Pressing the Go switch again restarts the print
job and clears the PAUSE. During PAUSE, the printer is in the off-line state.
NOTE:
If you do not wish to print the remaining data when the printer is in PAUSE, you can cancel the
job by pressing Job Cancel switch. Press the Go switch to clear the PAUSE and return the
printer to the “Ready” state.
5.2.2

Job Cancel switch

You can cancel the processing or printing of data with the Job Cancel switch. When the
printer is still receiving data or the printer is in an error state, the display shows “
DATA!!!
The display shows “
the printer returns to the “
Job Cancel, Reprint, +, -, Set, Back).
Function
Exit from the control panel menu.
Reprint settings and Error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the reprint menu. (1-999)
Move forward and backward through menus.
Move forward and backward through selectable options.
Select the control panel menu.
Set the selected menus and settings.
Go back one level in the menu structure.
” and you cannot cancel the job.
JOB CANCELLIG
” state.
READY
” until canceling is completed. After canceling the job,
2-22
NO