Using The Panel Switches - Brother HL-2060 User Manual

USER'S GUIDE

Using the Panel Switches

–
Shows various
Display
messages.
–
Lights when printer
READY
is ready to print.
SEL – Selects on-line or off-
line state.
FONT – Slelects font and
character set.
–
Sets functions in
MODE
various modes.
EMULATION – Selects printer
emulation.
CONTINUE – Ignores the error
and resumes
operation.
SHIFT – Shifts switch operation.
SET – Sets selected mode and funtions.
COPY – Sets the number of copies
to print.
3–8
The printer has a versatile control panel. It has two operation modes:
When you press the switches, they work in the NORMAL mode as
indicated above the switches. When you press the switches with the
SHIFT switch held down, they work in the SHIFT mode as indicated
below the switches. You can control the basic printer operations and
make various printer settings in the NORMAL and SHIFT modes.
For further information, see "SWITCHES IN NORMAL MODE"
"SWITCHES IN SHIFT MODE" in Chapter 4.
Fig. 3-1 Switch Operation in NORMAL and SHIFT Modes
Note
When the printer is in use in the BR-Script 2 mode, some switches are not
used.
ON LINE – Lights when printer is
DATA – Blinks when data is being
received and lights when
unprinted data remains in
ptrinter memory
FORM FEED
FEEDER – Selects paper source and
media type to be used and
duplex pritning.
(UP) – Forward scroll through
modes and settings.
TEST – Prints self-test pattern or fonts.
RESET – Resets printer or restores
–
Reverse scroll through
(DOWN)
modes and settings.
ECONOMY – Selects toner save and
power save mode.
and
.
in the on-line state
.
–
Prints out
remaining data or
reprints the same
pages.
to factory settings.