Temporary Disengagement Of The Burner; Combustion Adjustment And Verification - PSG Caddy PF01010 Installation And Operating Instructions Manual

A green diagnostic light on the control has four states:
- On = Flame present
- Off = No flame
- 2 seconds On, 2 seconds Off = "Recycle" mode
- 1/2 second On, 1/2 second Off = "Lockout" mode TEMPORARY SHUT-
OFF

3.4.6.5 TEMPORARY DISENGAGEMENT OF THE BURNER

By pressing and holding the reset button, the burner will shut-off until the reset
button is released. When the button is released, the control will start over at the
beginning of the normal cycle.
FOR ADDITIONAL INFORMATIONS ON OPERATION SEQUENCES OF THE
BURNER, CONSULT THE BURNER INSTRUCTION MANUAL.

3.4.6.6 COMBUSTION ADJUSTMENT AND VERIFICATION

To enjoy the efficiency of our oil burning units, you must respect the following
criterion:
CHECK LIST:
 SELECTION OF NOZZLE AND HEAD;
 NOZZLE / ELECTRODES POSITION IN RELATION TO THE HEAD AND
PUMP PRESSURE;
 OIL LINE IS BLEED;
 PRESENCE OF LOW FIRE BAFFLE (INSIDE THE BURNER) MUST BE
PRESENT FOR CADDY FURNACES.
 BAROMETRIC DAMPER POSITION.
TOOLS REQUIRED:
 DRAFT GAUGE
 SMOKE TESTER
 PUMP PRESSURE GAUGE
 NOZZLE AND ELECTRODES POSITION TESTER
 COMBUSTION TESTER
75