Caddy Wood/Oil Combination Furnace; Necessary Components For Caddy Wood/Oil Combination Furnace; Introduction; General Information For Oil Furnace - PSG Caddy PF01010 Installation And Operating Instructions Manual

3.4  CADDY WOOD/OIL COMBINATION FURNACE
3.4.1 NECESSARY COMPONENTS FOR CADDY WOOD/OIL COMBINATION
FURNACE
To use the configuration of the Caddy wood/oil furnace you have to assemble the
blower assembly (PA08568), sold separately. The assembly instructions are in the
instruction manual supplied with the blower assembly kit (follow steps 1 to 5).
You must also assemble the oil assembly kit, the fan limit controls for wood and
for oil as well as the burner. The assembly instructions are in the instruction
manual supplied with the oil assembly kit (PA03050 or PA03100) sold separately.

3.4.2 INTRODUCTION

READ THESE INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR
FURNACE.
rd
CERTIFIED BY INTERTEK ACCORDING TO CAN/CSA B366.1-M91, UL391 3
EDITION 1995 rev. 1999 & CAN/CSA B212-93 (JUNE 2000)
CAUTION
EXPLOSION OR FIRE HAZARD. FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE OR ANY FLAMMABLE LIQUIDS OR
VAPORS IN THE VICINITY OF THIS HEATING UNIT.
DO NOT ATTEMPT TO LIGHT THE BURNER WHEN EXCESS OIL HAS
ACCUMULATED, WHEN THE APPLIANCE IS FULL OF VAPOR, OR WHEN
THE COMBUSTION CHAMBER IS VERY HOT.
DO NOT BURN WASTE OR PAPER IN THE APPLIANCE AND DO NOT
LEAVE PAPER OR ANY COMBUSTIBLE MATERIAL AROUND THE
APPLIANCE.

3.4.3 GENERAL INFORMATION FOR OIL FURNACE

To obtain the maximum efficiency out of your furnace, follow the advice below
regarding the installation and operation of your WOOD/OIL combination furnace.
65