Technical Data - Electric Mode; Operating Instructions; Fan Limit Control; Technical Data - PSG Caddy PF01010 Installation And Operating Instructions Manual

3.3.4.6 TECHNICAL DATA – ELECTRIC MODE
TEMP.
OUTPUT
MODEL VAR.
(CFM)
(OF)
950 50
15 KW 1300 36
950 60
18 KW 1300 44
950 67
20 KW 1300 49
950 83
25 KW 1300 61
1800 44
WOOD

3.3.5 OPERATING INSTRUCTIONS

3.3.5.1 FAN LIMIT CONTROL

The fan limit control settings may need to be adjusted depending on the
installation, but they are set at 110 °F (fan OFF) and 150 °F. (Fan ON) at the
factory and these settings will work best in most installations.
For continuous operation of the blower, use the switch located below the fan limit
control which controls the low speed either at the "ON" position or the "OFF"
position.
It is not recommended to let the blower run on continuous mode when heating
with wood since the wood furnace must reach a certain temperature before the
blower starts in order to operate efficiently.

3.3.6 TECHNICAL DATA

See Section 3.2.5, in Caddy wood only furnace.
TOTAL
BTU/H AMPERAGE BREAKER
51195 75 100
61434 87 125
68260 95 125
85325 115 150
15
63
ALIMENT. VOLTAGE
ÉLÉMENTS
CALIBRE 1 PHASE
4 120/240 3 – 5 KW
2 – 5 KW, 2 –
4 120/240
4 KW
3 120/240 4 – 5 KW
2 120/240 5 – 5 KW
120
# OF