3.2
WOOD ONLY
3.2.1 MINI-CADDY WOOD ONLY INSTALLATION
3.2.2 UNIT LOCATION
The furnace must be installed where outside air supply will be sufficient for
proper combustion. In airtight houses, it might be necessary to install an outside
air inlet (see Section 2.12.)
The furnace must be positioned so that the connector is as short as possible.
o
Minimize the use of 90
elbows.
The owner must ensure a proper installation to allow a safe operation of
the appliance.
3.2.3 CLEARANCES TO COMBUSTIBLE MATERIAL
N.B.: THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE TO THE
INSTRUCTIONS MENTIONED ON THE FURNACE'S CERTIFICATION PLATE.
3.2.4 MINIMUM CLEARANCES REQUIRED FROM ANY COMBUSTIBLE
MATERIAL FOR THE MINI-CADDY FURNACE.
Figure 3.2.4 a
35