Matrox MXO2 Installation And User Manual page 92

72
Click the Configure button, then click the Video Capture Settings tab.
3
Under Input Device , select the device from which you want to capture
4
material (this may be automatically set for you based on your sequence's
video format):
$
$
¦ Note
@ 25 fps sequence.
If you're capturing material from a device connected to MXO2, from the
5
Input Source
to capture material from your HDMI source, select HDMI . If you're
capturing material from a DV-1394 device, the name of the device will
appear in the Input Source box. The available input sources depend on your
sequence's video format.
¦ Note
capture, you'll receive an error message. Either black video will be captured
or the capture won't be able to start until a valid input signal is present. In
Chapter 8, Using Matrox MXO2 with Adobe Premiere Pro
MXO2 , MXO2 Rack , MXO2 LE , or MXO2 Mini to capture material from
a device connected to MXO2.
DV-1394 to capture material from a DV-1394 device connected to your
system. For capture to a Matrox .avi file, DV-1394 input is supported only
for native DVCPRO HD capture when working with 1080i, 1080p
@ 29.97 fps, and 720p @ 23.98 fps, 25 fps, 29.97 fps, and 59.94 fps
sequences. For capture to a Matrox .m2v file, DV-1394 input is supported
for all SD sequences.
Capturing audio from a DV-1394 device is not supported for a 720p
list, select the type of input you want to capture. For example,
If Matrox MXO2 can't detect your source device when you start a