Exporting To A Matrox .Avi File - Matrox MXO2 Installation And User Manual

84

Exporting to a Matrox .avi file

Several software codecs are included with Adobe Premiere Pro so that you can
export your video to different formats. Your Matrox MXO2 system adds several
Matrox Video for Windows (VFW) codecs to the ones included with Premiere
Pro to allow you to export your sequence to a Matrox .avi file. For more
information about using the Matrox Video for Windows codecs, see
"Using the Matrox Video for Windows
If you have a Matrox MXO2 product with MAX technology, you can also export
your sequence to a Matrox MAX H.264 file as explained in
the Matrox MAX H.264 Codec with Adobe
Remarks
• When batch encoding clips that use the same Matrox VFW codec, they must
have the same codec settings. For example, you cannot export multiple clips
with the Matrox MPEG-2 I-frame HD codec that have different data rates.
You can, however, batch encode clips using different Matrox VFW codecs
and clips that use the same Matrox VFW codec with identical codec settings.
• To export clips from a Matrox NTSC or 486p sequence to a 720×480
Matrox .avi file using a Matrox VFW DV or MPEG-2 I-frame codec, you
must crop the height of the video by applying cropping on the Source page
of the Export Settings dialog box as follows:
Sequence format
Sequence format
Chapter 8, Using Matrox MXO2 with Adobe Premiere Pro
Direct export from Adobe
NTSC Top = 4, Bottom = 2
486p Top = 4, Bottom = 2
Direct export from Adobe
NTSC Top = 6, Bottom = 0
486p Top = 6, Bottom = 0
Codecs."
Software."
Crop settings for DV
Premiere Pro
Crop settings for MPEG-2 I-frame
Premiere Pro
Chapter 13,
Chapter 14, "Using
Export from Adobe
Media Encoder
Top = 3, Bottom = 3
Top = 4, Bottom = 2
Export from Adobe
Media Encoder
Top = 5, Bottom = 1
Top = 6, Bottom = 0